Taylorcraft 26 er straks klar for levering fra Hangar9, og Smallsize.no sender oss et eksemplar for review.
Flyet skal være 99% flyklart, rett fra butikken, så dette blir ekstremt spennende å teste ut
Hvis du har dårlig tid, og bare MÅ ha dette flyet med en gang, har dem 20ccm-utgaven på lager
i webshopen til SmallSize.no
Key Features
- Comes with a Zenoah 26cc engine
- Six Spektrum S6000 digital servos and one AR8000 Spektrum receiver pre-installed
- Scale tubular fuselage construction, full body pilot, and UltraCote® trim scheme
- Includes a CNC aluminum spinner and Evolution propeller
Overview
The Taylorcraft was one of the first affordable civilian airplanes available to pilots in America. Manufactured by Taylorcraft Aviation, the history of the Taylor brothers and their mark on aviation dates back almost seventy years. This particular Taylorcraft is a clipped wing design for better aerobatics, and features a conventional layout and fabric covering. It is a two-seat aircraft and the basic design has remained unchanged since 1936, and is still available as a personal sport aircraft today.
Hangar 9 brings a version of this popular model in a first-of-its-kind Bind-N-Fly (BNF) version, allowing for less time building and more time flying. Featuring incredible details, an extreme level of completion and a full body pilot, pilots will be very satisfied with this exciting giant scale release. With the included Zenoah 26cc engine, six Spektrum S6000 digital servos throughout and a pre-installed AR8000 Spektrum receiver, the assembly time is cut from hours to minutes. It will take longer to charge the batteries for flight than to do what’s left of the aircraft assembly. Add the value of genuine Hangar 9 UltraCote® and this is one airplane that all giant-scale pilots will want in their hangar.
Product Specifications
Wingspan: | 80.5 in (205cm) |
Overall Length: | 63.5 in (161cm) |
Wing Area: | 1150 sq in (74.5 sq dm) |
Flying Weight: | 14.0 - 14.5 lb (6.35 - 6.50kg) |
Engine Size: | Zenoah 26cc (included) |
Radio: | 6 channel minimum DSM2 compatible transmitter |
Servos: | 6 Spektrum A6000 digital servos (installed) |
Trim Scheme Colors: | White (U870), Black (U874), True Red (U866), 2" Red/White Checkers (U944) |
CG (center of gravity): | 3-5/8 - 4 inch (86 - 101mm) back from the leading edge at wing root |
Prop Size: | Evolution 16x6 (included) |
Spinner Size: | 2-1/2 inch (included) |
Recommended Battery: | 5-cell NiMH receiver battery (installed) |
Flaps: | No |
Retracts: | No |
Minimum Age Recommendation: | 14 years |
Experience Level: | Intermediate |
Recommended Environment: | Outdoor |
Assembly Time: | 3-5 Hours |
Is Assembly Required: | Yes |
Needed to Complete All you need is a 6+ channel DSM2-compatible transmitter. |
Kit Includes |
Manualen finner du her
men har ikke fått noe svar.
Pleier han vanligvis å svare på mail?
hei har aldrig sendt dem mail.men hvis du tar kontakt med geir fleche (3w norge)som det er linket til i tidligere post får du helt sikkert hjelp.han tar jo inn biela så det bør løse seg.