Tweet
Powerlog - ny datalogger fra iCharger
Snappet dette opp på nettet.
iCharger gjengen kommer med en ny datalogger etter at de har hatt CellLog på markedet en stund.
Den nye Powerlogg'eren vil være en mer universal logger og logge flere parameter blant annet strømtrekk.
Dette er ikke en telemetri dingz men en liten enhet som plasseres i flyet, etter turen kan du lese av dataene på displayet eller koble den till PC'en for plotting av data.
Foreløpig ser det ut som om GA vil være i september.
iCharger gjengen kommer med en ny datalogger etter at de har hatt CellLog på markedet en stund.
Den nye Powerlogg'eren vil være en mer universal logger og logge flere parameter blant annet strømtrekk.
Dette er ikke en telemetri dingz men en liten enhet som plasseres i flyet, etter turen kan du lese av dataene på displayet eller koble den till PC'en for plotting av data.
Foreløpig ser det ut som om GA vil være i september.
PowerLog is one multifunctional compact monitoring and logging machine, adopting 32 bit ARM processor, with 12 bit A/D convertor to ensure the measurement.
Spcifications:
Input voltage range: 4.5 – 60.0VDC
Current measurement range: -130A – +130A（continuance -40A – +40A）
Cell voltage range: 0.05 – 28.0VDC
External temperature measurement range: -55℃– +125℃ (-67 oF–+257 oF)
Pulse measurement range: 10us–999999us
Steering gear pulse output range: 0–20ms (0.5us step)
RMP measurement range: 0–99999 RPM
Voltage display resolution: 1mV
Current loading of test: 12mA
Maximum voltage for alarm port: 50VDC
Current drain for alarm port: <500mA
Log Files storage: 16Mbit (33 hours@2 seconds logging interval)
Sample logging time interval: 0.25 – 60 seconds
PC Connect: USB port
Weight: 28g
Dimensions (L X W X D): 85X40X13mm
3.34”X1.57”X0.51”
Special features:
PowerLog 6S allows bidirectional current sensing, adopting 0.2 mΩ current sampling resistor with low insertion loss.
1 channel 0-60V voltage measurement. 6 channels cells voltage measurement (can not only measure 1-6S Li/ NiMH/NiCd/ Pb battery individual voltage, but also measure 6 channels 0.05-28V voltage).
4 channels temperature measurement (1 channel internal temperature measurement and 3 channels external temperature measurement).
Propeller RPM measurement, adopting non-contact optical sensing, user settable blade number.
Pulse signal measurement: frequency, period, pulse width, duty cycle. Applicable to remote control channel signal, measure, and monitor.
Steering gear driver output: manual and auto mode, auto mode is able to break in steering gear.
Small size with multiple functions, backlight 128*64 lattices LCD and Buzzer Tone Reminder; the interface can be operated smoothly.
It can be set Cells Voltage, Pack Voltage, Timer Over, Current, Power, Capacity, Temperature, RPM, Period and Pulse Alarm. What’s more, the extra alarm output can be linkage controlled by the users.
It has 8 sets default monitor alarm settings, which can be selected for different battery packs.
PowerLog 6S has been 100% calibrated before it enters to the market, at the same time, it supports the calibration by users themselves.
The logging interval can be set by users’ different needs. PowerLog 6S has a 16Mbit flash storage, which can log offline data in 33 hours @2 seconds logging interval.
Support upgrading the hardware program by USB port. Adopting HID protocol, dispense with installing Driver from PC, plug and play.
The PowerLog 6S also supports the “logview” software and can display, plot and analyze the charge and discharge data by it.
Spcifications:
Input voltage range: 4.5 – 60.0VDC
Current measurement range: -130A – +130A（continuance -40A – +40A）
Cell voltage range: 0.05 – 28.0VDC
External temperature measurement range: -55℃– +125℃ (-67 oF–+257 oF)
Pulse measurement range: 10us–999999us
Steering gear pulse output range: 0–20ms (0.5us step)
RMP measurement range: 0–99999 RPM
Voltage display resolution: 1mV
Current loading of test: 12mA
Maximum voltage for alarm port: 50VDC
Current drain for alarm port: <500mA
Log Files storage: 16Mbit (33 hours@2 seconds logging interval)
Sample logging time interval: 0.25 – 60 seconds
PC Connect: USB port
Weight: 28g
Dimensions (L X W X D): 85X40X13mm
3.34”X1.57”X0.51”
Special features:
PowerLog 6S allows bidirectional current sensing, adopting 0.2 mΩ current sampling resistor with low insertion loss.
1 channel 0-60V voltage measurement. 6 channels cells voltage measurement (can not only measure 1-6S Li/ NiMH/NiCd/ Pb battery individual voltage, but also measure 6 channels 0.05-28V voltage).
4 channels temperature measurement (1 channel internal temperature measurement and 3 channels external temperature measurement).
Propeller RPM measurement, adopting non-contact optical sensing, user settable blade number.
Pulse signal measurement: frequency, period, pulse width, duty cycle. Applicable to remote control channel signal, measure, and monitor.
Steering gear driver output: manual and auto mode, auto mode is able to break in steering gear.
Small size with multiple functions, backlight 128*64 lattices LCD and Buzzer Tone Reminder; the interface can be operated smoothly.
It can be set Cells Voltage, Pack Voltage, Timer Over, Current, Power, Capacity, Temperature, RPM, Period and Pulse Alarm. What’s more, the extra alarm output can be linkage controlled by the users.
It has 8 sets default monitor alarm settings, which can be selected for different battery packs.
PowerLog 6S has been 100% calibrated before it enters to the market, at the same time, it supports the calibration by users themselves.
The logging interval can be set by users’ different needs. PowerLog 6S has a 16Mbit flash storage, which can log offline data in 33 hours @2 seconds logging interval.
Support upgrading the hardware program by USB port. Adopting HID protocol, dispense with installing Driver from PC, plug and play.
The PowerLog 6S also supports the “logview” software and can display, plot and analyze the charge and discharge data by it.
Comment