Resette passord? Klikk HER
Har du en gammel konto, men ny mail? Send en melding, så fikser vi det. Bare oppgi brukernavn og gammel + ny mailadresse
Vi kan også smelte sammen 2 brukere til 1, hvis du har registrert deg på nytt.
Vi setter pris på at alle logger seg inn, selv om du ikke skriver noe, dette for å se aktivitet.
- Stiv og lett balsa/finer konstruksjon, kan fly svært sakte - Komplett fly inkl 2 stk batterier og Spectrum mottager - All elektronikk passer godt til flyet og kommer fra Hobbycity.com(unntatt mottager). - Flyet er ferdig montert som vist på bilder og har ca 10-12 turer i ”loggen” - Kan sees/hentes på Fitjar, sendes ikke. Produsentens beskrivelse: Overview The Edge 540 BP 3D combines the sturdy construction of a balsa/lightweight plywood airframe with the uninhibited 3D capability of a lightweight profile park flyer. It’s all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wooden airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote, so you can be up and flying in no time. Product Specifications Wingspan: 35.5in (900mm) Overall Length: 36.5 in (930mm) Wing Area: 410 sq in (26.5 sq dm) Flying Weight: 15-16 oz (425-455g) Motor Size: Park 400 or Park 450 Radio: 6 channels (for proper mixing) Servos: 4 sub-micro Trim Scheme Colors: Ultracote Lite Transparent Clear (HANU964), Ultracote Lite Transparent Yellow (HANU967),Ultracote White (HANU870),Ultracote True Red (HANU866) CG (center of gravity): 4 1/2-inch (114mm) Prop Size: 11x3.8 slowflyer (park 400) or 12x6 E (Park 450) Hardware Included: Yes Speed Control : 20A Brushless Recommended Battery: 11.1V 3-cell 910-1320mAh Li-Po Control Throw (Ailerons): 1" (25mm) with 20% Expo on Low or 2" (50mm) with 40% Expo on High Control Throw (Elevator): 2" (50mm) with 20% Expo on Low or 2-3/4" (70mm) with 45% Expo on High Control Throw (Rudder): 3-1/2" (89mm) Left and Right Scale: Park Flyer Approx. Assembly Time: 3-4 Hours 6-channel transmitter (for proper mixing and dual rate capabilities) Micro receiver 4 sub-micro servos Motor 20A Brushless ESC Propeller Battery & Charger
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.